At Krazy Kat Music we are VERY fortunate to be able offer exceptional guitar repairs by the finest guitar technician in San Antonio or South Texas--Gene Warner.   To make a long story short if it's got frets, he’ll work on it and will have your instrument playing better than you ever thought it could.   Gene is available every weekday at the store from 5-6pm.

• Re-String - Free Re-String with any other repair. Only the cost of strings will apply.
• Truss Adjust - Straighten Fingerboard/Correct Relief.
• Install Strap Button
• Machine Head Adjustment - Adjust Tension on Tuning Machines & Lubricate Gears (If Necessary).
• Action Adjustment - Acoustic/Electric - Set String Height At Nut & Saddle.
• Intonation Adjustment - Acoustic/Electric/Archtop - Set String Length At Nut & Saddle.
• Tremolo Adjustment - Adjust Tension - Balance Tremolo Left to Right & Front to Back.
• Complete Setup - Complete Setup Includes Re-String, Fret Buff, Truss Adjust, Intonation and Action Adjust, Fingerboard Treatment, Machine Head Adjust and Lubrication, Tremolo Adjust, Tremsetter Adjust, Replacement of Springs (if necessary), Spray Electronics, Clean and Polish, Pickup Adjust, Strobe.
• Replace Pickguard - Acoustic & Electric.
• Custom Pickguard/Finger Rest - Design & Create Custom Pickguard Or Finger Rest.
• Replace With Bone & Blank
• Replace Compensating Saddle (Bone)
• Replace With Bone Blank - 6 string/12 string saddle at insert.
• Fill & Re-Cut Nut Slots
• Bridge Replacement - Electric Guitar or Bass-Electric Guitar With Tremolo-Acoustic Guitar (Stock).
• Replace Nut with Graphite Blank - Acoustic / Archtop.
• Re-Size/Re-shape Bridge - Shave Down Bridge On Acoustic Guitars To Allow Correct String Tension/Angle And Correct Action That Is Too High (alternative to neck reset on some guitars).
• Re-Glue Bridge - Includes Sanding Under Bridge & Adding Wood (If Necessary).
• Bridge Cracks - Seal Cracks In Bridge W/ Epoxy/Wood Filler/Or Wood. De-Rust Bridge - Electric Guitars.
• Reconstruct Tunamatic - Disassemble Bridge/Clean/De-Rust/Replace Parts & Set-up.
• Tremolo Installation - Floyd Rose Style with or w/o routed cavity.
• Re-Crown - Re-Round Top of Frets - Buff/Polish & Clean Fingerboard. Fret Ends - File Fret Overhang.
• Partial Fret Job - Replace some of frets with matching wire, Recrown & dress frets, clean fingerboard - with or without binding.
• Complete Re-Fret - Pull Frets/Install New Frets/Includes Complete Fret Job & Fingerboard Repairs- With or W/O Binding.
• Custom Routing - For additional or different size pickups, larger control cavitys etc.
• Pickup Replacement
• Replace Potentiometer
• Replace Selector Switch
• Install Mini Toggle Or Push/Pull Pot
• Install Output Jack
• Install Pre-amp (Pre-amp Not Included).
• Complete Rewire - Standard Wiring & Custom Wiring.
• Spray Electronics - Clean & Lube Noisy Pots.
• Transducer Installation - Saddle Type - Microphone (Miniflex) - Soundhole W/ Endpin Jack.
• Machine Head Replacement -Replace Tuning Machines, Fill Old Screw Holes & Re-Route Tuning Peg Holes.